Do you need help in setting up a TP-Link Extender? I’ll help you with this post. Here, you will find a full guide with brief details on the TP-Link Extender Setup. You can use it to set up an extender, and additionally, I will tell you about the 4 Best Alternatives to TP-Link Extender.

Contents

• 1 How to Set up a TP-Link Extender?
  • 1.2 Step-2: Configure the TP-Link Extender using the WPS Button
• 2 4 Alternatives to TP-Link Extender

How to find your wireless network password? If you don’t know your wireless network password, use the info below to find it. The user interface can be different for different version of Windows, but the concept is the same. Find your Wireless WEP and WPA network password for Windows 10. Step 1 – Go to Settings Network & Internet. This wikiHow teaches you how to change a TP Link router's wireless network password. Some newer routers have dual band wireless connections which provide a wireless network at 2.4GHz and 5GHz. Sometimes you can set a separate password for both networks. A 2.4GHz network has a slower internet speed, but greater range. Find the default login, username, password, and ip address for your TP-Link router. You will need to know then when you get a new router, or when you reset your router.

How to Set up a TP-Link Extender?

A TP-Link Extender, also known as a ‘range extender‘ is a device to expand and strengthen the wifi coverage in your home, office or any other place. It extends the WIFI signals into areas where it normally cannot on their own, and also reduce the interferences to the signals. Hence, providing more coverage by the Wifi Network. Setting up a range extender can be quite confusing sometimes. However, you don’t have to worry as I’ll explain step-by-step.

There are three main steps when you need to set up a TP-Link Extender:

1. Connecting the TP-Link Extender to a Computer and a Power source.
2. Configuring the TP-Link Extender by using a WPS button or manually.
3. Put the TP-Link Extender in a proper place.

I’ll explain to you how to do this in a simple manner by just following a step-wise guide.

Step-1: Connect the TP-Link Extender to a computer and power outlet

• First, you need to plug-in the TP-Link Extender into a wall outlet near the main router so that you can turn it on.
• Now connect the extender to your computer using an ethernet cable.

Step-2: Configure the TP-Link Extender using the WPS Button

• After you have connected the extender, push the WPS button on the main Router or Access point, and then immediately push the WPS button on the Range Extender. The WPS button is usually present at the back of the device but may differ depending upon different devices.
• It is necessary that you push the WPS button on the extender in less than 2 minutes after pushing the main router WPS button. That’s why I wrote ‘immediately’ and insist that you don’t miss this crucial step.
• Make sure the WPS LED of your router blinks after you pushed the WPS button, and also the WPS LED of the extender blinks after you pushed the WPS button. If either of the LEDs doesn’t blink, you need to press the button again on the device the LED doesn’t blink.
• Wait for 2 minutes. The router and the extender need some time to set up and find perfect synchronization.
• Now check the Signal LED of the Range Extender. If it is on, you have successfully set it up. The color of this LED doesn’t matter here and also the number of signal bars.

Alternatively, you can configure the Range Extender Manually.

• After you have connected the TP-Link Extender in the power outlet and the computer, open the browser on your PC and type this URL:http://tplinkrepeater.net in the search bar. If this doesn’t work, type this URL: http://192.168.0.254.
• A TP-Link web page will now appear on the screen.
• Now go to Quick Setup and click on Next.
• Here, choose your region and click on Next.
• Now let the TP-Link extender scan for wireless networks. This may take some time (around 2 minutes), depending on the number of networks available around you.
• From the list of available networks, choose your wireless network and then click on Next.
• Next, enter the wireless password when the system asks you.
• Now if you want a single extended wireless network, click on ‘Copy from the main router,’ or if you want to create a different network, click on ‘Customize.’ Then click on Next.
• Just check and review the network settings carefully and click on ‘Finish’ once you find everything is correct.
• Check the Signal LED on the Extender. If it is turned on, you have successfully set up the range extender.

Step-3: Put the Extender in a proper place

Now that you have set up and configured the TP-Link Extender, you can simply decide and put it in a proper place. So that you can get the most out of it. Also, if you have set up and configured the extender once, you don’t need to repeat the process every time you plug it in. The Range Extender will automatically connect every time you plug it in the computer.

That’s how you can set up and use a TP-Link Extender at your home, office or any other place.

4 Alternatives to TP-Link Extender

If you still haven’t bought the TP-Link Extender, and you are unsure about purchasing it. I’m listing here the 5 Best alternatives to the TP-Link Extender to buy in 2020 and beyond. You can choose from these depending on your location and budget.

1. Linksys RE7000 Max-Stream AC1900+ Extender

Linksys RE7000 Max-Stream extender supports dual-band 802.11ac alongside 802.11n/g/b/a for excellent expansion. It even works superbly even with older WiFi devices that can’t take advantage of the speed offered by 802.11ac. This extender has four gigabit Ethernet ports for high-speed wired connections.

2. D-Link DAP-1650 Extender (AC1200)

D-Link DAP-1650 also supports dual-band 802.11ac alongside 802.11n/g/b/a. Hence, being a perfect fit even for the older wifi routers. It has four gigabit Ethernet ports for high-speed wired connections. You can find it in any local shop or on e-commerce websites.

3. Linksys AC1200 Max Extender RE6500

The Linksys AC1200 provides four Gigabit Ethernet ports, with excellent performance. It also has two adjustable and replaceable antennas. This extender is somewhat different from other options available in the market due to its appearance. It is designed like an old-fashioned WiFi router. The connectivity offered is also powerful.

4. Netgear Nighthawk X4 AC2200 Extender (EX7300)

Netgear is a popular name in the market. The Nighthawk X4 AC2200 extender works on the MU-MIMO technology. This technology is based on a set of multiple-input and multiple-output technologies for wireless communication. It is the best option if you want to expand the coverage in order to increase the number of connecting devices.

Final Verdict

Now you know everything about the TP-Link Extender setup. You can easily set it up whenever you need it in the future, or just help a friend to set it up for him. I’d recommend doing the extender configuration manually, as the WPS Button of the extender and router would sometimes de-synchronize leading to certain issues. Also, if you want to purchase any other extender, I’ve listed the good ones. For any queries, doubts, suggestions, feel free to use the comment box.

Here you can find the default IP address and the username and password for the user interface of the TP-LINK TL-WR802N 300Mbps Wireless N Nano router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

Preconfigured Wi-Fi settings

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the TP-LINK TL-WR802N, you have to do the following steps for access:

1. Put router into operation
2. Connect the device via Wi-Fi* or a network cable with the router
3. Open web browser
4. Enter IP address or URL in the address line and confirm with ‘Enter’ button
5. Enter username and password in the open user interface and confirm again

* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the TP-LINK TL-WR802N to its default settings, you have to do the following steps:

1. Put router into operation
2. For at least 5 seconds, press the Reset button
3. Device restarts automatically
4. Restoration of standard settings is finished

Execute software reset

With the TP-LINK TL-WR802N, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

Tp Link Wifi Password Finder Netgear

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.